Please use this identifier to cite or link to this item:
|Title:||A wall-coated catalytic capillary microreactor for the direct formation of hydrogen peroxide|
|Citation:||Ng, J.F., Nie, Y., Chuah, G.K., Jaenicke, S. (2010-02-05). A wall-coated catalytic capillary microreactor for the direct formation of hydrogen peroxide. Journal of Catalysis 269 (2) : 302-308. ScholarBank@NUS Repository. https://doi.org/10.1016/j.jcat.2009.11.015|
|Abstract:||The direct formation of hydrogen peroxide from H2 and O2 was successfully carried out in a capillary microreactor at room temperature and atmospheric pressure. A key element in sustaining the activity of the catalyst is the incarceration of the palladium nanoparticles in a cross-linkable amphiphilic polystyrene-based polymer, prepared following the protocol of Kobayashi [R. Akiyama, S. Kobayashi, J. Am. Chem. Soc. 125 (2003) 3412-3413]. The immobilization effectively reduced the leaching of palladium under acidic conditions. Applying the catalyst as a coating on the inner walls of a capillary enabled the sustained production of 1.1% hydrogen peroxide over at least 11 days. The highest catalyst utilization in a 2 mm capillary reactor was 0.54 molH2O2/h gPd. When the inner diameter of the reactor capillary was reduced to 530 μm, the rate was enhanced fourfold to 2.28 molH2O2/h gPd corresponding to a turnover frequency of 0.067 s-1. © 2009 Elsevier Inc. All rights reserved.|
|Source Title:||Journal of Catalysis|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Sep 19, 2018
WEB OF SCIENCETM
checked on Sep 5, 2018
checked on Sep 14, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.